PRIMER PU-1000 is a mono-component, low viscosity, high solids content. It has been specifically designed to increase bonding and improve the surface leveling of the substrates prior to the application of the DESMOPOL or TECNOCOAT.

PRIMER PU-1050 is a dual-component, low viscosity 100% solids primer. It has been specifically designed to increase bonding and improve the surface leveling prior to pure polyurea TECNOCOAT system or the DESMOPOL application. It can be applied on porous substrates such as concrete or cement

PRIMER PUc-1050 provides high adhesion at lower environmental temperatures, is a two-components, low viscosity,100% solids primer. It has been specifically designed to increase bonding and improve the surface leveling prior to pure polyurea TECNOCOAT system or the DESMOPOL application. It can be applied on porous substrates such as concrete or cement.

Primer EP-1010 it’s a two-component, 100% solid content, epoxy resin-based including solid charges. Specially
designed as a primer to increase adherence and repair substrates on mortar, concrete or ceramic tiles for
flooring and waterproofing systems TECNOFLOOR, TECNOTOP, TECNOCOAT, and DESMOPOL.

It’s a bi-component fluid primer epoxy based 100% solids, is specially designed to increase adherence of TECNOFLOOR T-3020 systems.

It’s a two component primer, epoxy resin based 100% solids, to use as a primer, to increase adherence of TECNOCOAT and DESMOPOL waterproofing liquid systems, in applications on metal surfaces.

PRIMER-EPW 1070, without any solvents, special designed to increase adherence of DESMOPOL, TECNOCOAT P-2049, TECNOFLOOR systems and other products based on polyurethane. PRIMER-EPW 1070 has 0% volatile chemicals.

PRIMER WET is a free solvent resin, low viscosity, applicable in a single layer. It is specially designed to increase adherence of waterproofing systems based on continuous membranes basically , TECNOCOAT P-2049-pure polyurea membrane, DESMOPOL-polyurethane membrane, even on substrates with high residual moisture. Application is recommended on porous surfaces such as concrete or mortar.

PRIMER T is an alcohol-based primer, colorless, without yellowing. Specially designed to increase adhesion on non-porous substrates, for uses under DESMOPOL T, transparent, aliphatic polyurethane membrane. To apply on non-porous substrates such as vitrified tiles, ceramic, marble...